background image

GSF2818KH 
Owner’s Manual 

0

 

 

                                       

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DANGER:

 

Failure to follow these 
instructions could result in 
fire or explosion that could 
cause property damage, 
personal injury or death.

 

WARNING:

 

FOR YOUR SAFETY:   

 

For Outdoor Use Only 

(outside any enclosure)

 

PROP 65 WARNING:

 

Chemicals known to the state 
of California to cause cancer, 
birth defects or other 
reproductive harm are created 
by the combustion of 
propane.

 

DANGER:

 

DO NOT use gas grill for 
indoor cooking or heating. 
TOXIC fumes can accumulate 
and cause asphyxiation. DO 
NOT use in or on boats or 
recreational vehicles.

 

MODEL#GSF2818KH 

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.   
IF YOU ARE ASSEMBLING THIS UNIT FOR SOMEONE ELSE, 
GIVE THIS MANUAL TO HIM OR HER TO SAVE FOR FUTURE 
REFERENCE. 

FOR CUSTOMER SERVICE, EMAIL TO 

[email protected] OR 

CALL 1-877-885-8227 (TOLL-FREE), 07:00 A.M. – 16:00 P.M. 

(EST), MONDAY-FRIDAY. 

WARNING: 
Improper installation, 
adjustment, alteration, service 
or maintenance can cause 
injury or property damage. 
Read the installation, 
operation and maintenance 
instructions thoroughly 
before installing or servicing 
this equipment. 

 

Service Center: 1-877-885-8227

Summary of Contents for GSF2818KH





















Reviews: