Senco DuraSpin DS522-18V, Operating Instructions Manual

Page: 16 / 265

16
EN
The battery pack houses 4 coloured LED lights. These LEDs indicate the state of charge and possible problems inside the
battery pack.
Mode
Battery Pack
Inserted? Power Charging/Full
Condition
Evaluate Temp. Delay
Defective
Standby/Power No Fade X X X X X
Standby Full Yes Fade Fade Ready for Use X X X
Charging Yes Solid Green Flashing Green <80% X X X
Fully Charged Yes Fading Green Fading Green 100% X X X
Evaluating Yes Solid Green X Measuring Flash Orange X X
*Temp Delay Yes Solid Green X Hot/Cold X Flash Orange X
Defective Yes Solid Green X Damaged X X Solid Red
*Delay up to 20 minutes depending on battery cell temperature inside pack.
Figure 2 - Battery Charge Level Lights
Press raised red button on battery pack to check charge:
y
Red Flashing = 0-15% Charge
y
Red On = 16-25% Charge
y
Red and Orange On = 26-50% Charge
y
Red, Orange, and Green On = 51-75% Charge
y
All On = 76-100% Charge
Tips for maintaining maximum battery life:
y
Charge the battery pack before it is completely discharged.
y
Always stop tool operation and charge the battery when you notice less tool power.
y
Never recharge a fully charged battery.
y
Overcharging shortens the battery service life.
Battery Disposal
y
To preserve natural resources, please recycle or dispose of properly. This product contains Li-Ion. Local state or
federal laws may prohibit disposal of Li-Ion batteries in ordinary trash.
y
Consult your local waste authority for information regarding available recycling and/or disposal options.
y
Do not dispose of electric tools together with household waste material! In observance of European Directive
2002/96/EC on waste electrical equipment and its implementation in accordance with national law, electric
tools that have reached the end of their lives must be collected separately and returned to an environmentally
compatible recycling facility.
TOOL OPERATION