17
Basic Operation for Base
A. Call function
A-1. Making calls
A-2. Redial
A-3. Automatic Dialing
For example, dial the phone number 22183588.
2 2 1 8 3 5 8 8
Press first, then dial the number after hearing the dial tone.
To hang up, press again.
Redial
While in standby mode, press first, then press Redial .
1. Storing phone numbers in memory (20 sets of 16-digit number
maximum) (in stand-by mode)
MEMORY
2 2 1 8 3 5 8 8
MEMORY
N
Phone number Store (N: 00~19)
2. If the base unit is connected to a PBX
We recommend you press REDIAL/P (PAUSE) followed the access
number 0 or 9 for an outside line and the phone number.
MEMORY
0
REDIAL/P
2 2 1 8 3 5 8 8
Access No. Pause Phone No.
MEMORY
N (stand-by mode)
Store Location(N:00~19)
Pressing REDIAL/P (PAUSE) once creates a 3 second pause.
This can prevents miss dialing when you redial or dial a stored
number.
3. Dialing a stored number(in standby mode)
MEMORY
N (N: 00~19)
Auto dial the phone number stored in location " N ".
Press First, then press MEMORY N after hearing the
dial tone.
4. Answering Calls
Press to answer a call.
To hang up, press again.
20
A. Turn On/Off Handset:
B. Making Calls:
C. Answering Calls:
D. Disconnecting calls:
E. Hands-free Speaker Phone
:
1. When the handset is under power-off, you can press END key to turn
it on. A tone " DO-MI-SO" will be sounded.
2. When the handset is in the standby mode, you can press END key
to turn it off. A tone "SO-MI-DO" will be sounded.
You can make an outgoing call in one of two ways.
1. From the STANDBY MODE, enter the number you wish to call. The
number you input will appear on the handset screen as typed, then
press TALK Key to make a call.
2. From the STANDBY MODE, you can press TALK Key to make a call.
When the dial tone is heard, you can dial a number and the screen
will display the number being dialed.
1. If the handset is in the base or charger, pick up the handset to
answer the call. Otherwise, press any key except END key to take
the incoming call.
2. If your caller ID service is available, the LCD screen on handset will
display name (FSK System only) and phone number as well as
icon Flashes.
3. "Missed calls" appears and followed by " " plus two digits represent
the numbers of unread calls. You can refer to the option of
ReceivedCalls for looking over its content.
From the TALK MODE, you can end a call by pressing END key or by
placing the handset in the base or charger.
Once press the button on the right-upper corner of handset to
enter this function. The icon will appear on the LCD screen It
allows the voice coming from the rear speaker in order that you can
make a conversation not need to hold the handset. The suggested
distance between the location of handset and your mouth for
performing this function is 30cm.
Basic Operation for Handset
*
