28
Registering
new Handset for Multi-Handset System
Your handset(s), if purchased with base unit, is pre-registered at the factory
and doesn't need to be re-registered.
A. Handset Registration
When purchasing a new handset, be sure to follow below steps for
registering it.
(1) The new handset (non-registered)
1. Install the battery (P. 9)
2. Check the handset whether it is a new one or not by pressing
to turn it on.
Θʳ
If the handset can not be turned on, it is a non-registered one.
Do the following steps 2~3.
Θʳ
If the handset can be turned on, it is the one which has registered
to another base unit already. Please do the procedure B (P. 29)
to de-register it first, then do the following steps 2~3.
(2) Base unit
1. Unplug the AC adaptor.
2. Press and hold on
key.
3. Plug in the AC adaptor.
4. After 3 seconds, a tone "DO-SO-MI-SO..." sounds for 10 seconds.
5. Release
key .
(3) The new handset
1. During the tone "DO-SO-MI-SO..." sounds, place the new handset
on the base unit with facing up.
2. A tone "DO-SO-MI-SO..." sounds from the handset.
3. The base unit registers the new handset automatically.
Θ
When successfully registered, a confirmation tone
"DO-MI-SO-DO" sounds.
Θ
The ID of new handset is set in sequence after register.
)/$6+
