16
1. Base unit: While in stand-by press
and all the handsets ring for
30 seconds.
Θʳ
To stop paging, press
again.
2. Handset: Press any key except
or pick it up if it is placed on the
base unit or on the charger to answer.
3. Handset: To end the intercom, press
or place the handset on
the base unit or on the charger.
(3) Paging the desired handset
For example: Page the handset No.5 through the handset No. 2.
1. Base unit: Press
.
2. Handset No. 2: Press any key except
to answer.
3. Handset No. 2: Press
5 to transfer the paging and the
handset No. 5 rings for 30 seconds (P. 26).
4. Handset No. 5: Press any key except
to answer.
If the handset No. 5 doesn't answer, the paging will
be back to handset No.2 which will ring for 50
seconds (P. 26).
NOTE:
1. During paging from the base unit:
A confirmed melody sounds if the base unit receives the response
from handsets. If the melody does not sound, it means that:
1) The handset is off.
2) The handset is out of communication range.
3) The handset's ring mode is set at "4" (P. 27).
2. During the intercom:
1) Intercom can only be ended by the handset.
2) If a bell sounds, an incoming call has been received.
To answer, press
and the intercom is ended.
G. Intercom during a Call
During a call, press
.
Θ
The call is put on hold and the hold music is heard on line.
Θ
A warning beep sounds every 30 seconds.
)81&
)/$6+
,17(5&20
