26
Press
0
Ϡ
2
PULSE
(5) Setting transferring waiting time
When the handset transfers a call to another handset, and if the
designated handset doesn't answer within period of transferring
waiting time which has been set, then it will stop paging and ring
back the original handset.
0
5
N
(handset)
(N: 1~9) store
N: Transferring waiting time
1 : 15 sec.
4 : 30 sec. (default)
7 : 45 sec.
2 : 20 sec.
5
: 35 sec.
8 : 50 sec.
3 : 25 sec.
6 : 40 sec.
9 : 55 sec.
(6) Setting call-back waiting time
Continue above item, if the handset doesn't answer the call within
period of call-back waiting time which has been set, then the call
will be ended.
0
6
N
(handset) (N: 1~9) store
N: Call-back waiting time
1 : 15 seconds
4 : 30 seconds
7 : 45 seconds
2 : 20 seconds
5 : 35 seconds
8 : 50 seconds (default)
3 : 25 seconds
6 : 40 seconds
9 : 55 seconds
B. Setting the Handset
When the setting is finished, a confirmation tone " bi-bi" sounds. When failed,
an error tone "bi-bi-bi" sounds. If misdialed, press
to end setting, then
restart.
(1) Change Handset's ID number (in stand-by mode)
To change handset's ID, please make sure that each handset has an
individual ID. It is not allowed that two handsets have the same ID and
the ID number is more than the fifteen (to check your current
Handset I.D. #, please refer to P.29) . Once above setting is being
against, the operation through base unit will be failed.
0(02
0(02
,17(5&20
,17(5&20
,17(5&20
0(02
