same Network ID. (The factory setting is “
default
”).
Note: This item won’t take effect in “Bridge” mode.
4. Channel
: The radio channel number. The permissible channels depend on the
Regulatory Domain.
The factory setting is as follows:
USA/Canada
Europe/Australia (ETSI)
Japan (All)
Channel 6
Spain, France
Channel 10
Japan Channel
14
5. WEP
Security
: Select the data privacy algorithm you want. Enabling the security can
protect your data while it is transferred from one station to another. The standardized
IEEE 802.11 WEP (64-bit or 128-bit) is used here.
6. WEP Key 1, 2, 3 & 4
: When you enable the 64-bit or 128-bit WEP key security,
please select one WEP key to be used and then input 10 or 26 hex-decimal (0-9, A-F)
digits.
MAC Access Control
Setup MAC addresses to control which wireless clients can
associate to the wireless LAN.
*
Wireless Bridge:
Two of this device will be able to communicate with each other when they are
working in the “Bridge” Mode. You can connect two wired LANs together via wireless
connection with wireless bridge function. The connection is as follows:
-16-
