2.1.2. Rear Panel
Figure 2-2 Rear Panel
Ports:
Port Description
12VDC
Power inlet: DC 12V, 1.5A (minimum)
Port 1-2
the ports where you will connect networked computers and other
devices.
Connector
TNC connector
RS-232
RS-232 for ISDN/TA modem
2.2 Procedure for Hardware Installation
1. Decide where to place your Wireless Access Point
You can place your Wireless Access Point on a desk or other flat surface, or you can
mount it on a wall. For optimal performance, place your Wireless Access Point in the
center of your office (or your home) in a location that is away from any potential
source of interference, such as a metal wall or microwave oven.
-8-
