2. Setup LAN connection
a.
Wired LAN connection: connect an Ethernet cable from your computer’s Ethernet
port to one of the LAN ports (number 1-2) on the AP. Repeat the process to
connect other computers to the AP. If you need to connect more than two
computers to the AP, use a 10/100 Fast Ethernet switch (preferred) or hub and
connect the Ethernet cable from the AP to the switch/hub’s UPLINK port. You
may need to switch on the UPLINK feature on the switch/hub. The AP supports
up to 253 network computers and devices.
b.
Wireless LAN connection: locate this product at a proper position to gain the best
transmits performance.
Figure 2-3 Setup of LAN connections for this product.
Note:
If an UPLINK port is not available, simply connect a
crossover Ethernet cable from the AP to the switch/hub.
-9-
