SENAO SI-7800H User’s Manual
SENAO INTERNATIONAL CO., LTD.
37
12.3.3 Firmware Upgrade
Clicking the
Firmware Upgrade
option will bring you to the Firmware
Upgrade page as shown in Figure 12.3.3.1. You can upgrade the firmware
of SI-7800H by using a FTP server. Please enter FTP server’s IP address,
user name, password and the file name of the new firmware. After
finishing the configuration, click the Apply icon at the bottom of this
page to start the firmware upgrading. A confirmation window (Figure
12.3.3.2) will pop up asking “Do you wish to continue with the upgrade
process?” You can click ‘OK’ to continue or ‘Cancel’ to abort. If the
‘OK’ is chosen, a warning window (Figure 12.3.3.3) will pop up. Please
follow the instruction in the warning window to successfully upgrade the
firmware.
After the firmware is upgraded successfully, the Login page will appear.
You need t o turn the SI-7800H off and then turn it on to make the new
firmware effective.
Figure 12.3.3.1 Firmware Upgrade page
