Sena X1 PRO Manual Download Page 60

Page: 60 / 86

Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 60

7. INTERCOM SETUP

menU

3. You can have

two-Way intercom

multi-

Way intercom

communication with up to three

intercom Friends

using non-Sena headsets by

following the procedures described below.

Example of a Three-Way Universal Intercom

Example of a Four-Way Universal Intercom

You

Non-Sena

Headset

Non-Sena

Headset

Sena

Headset

You

Sena

Headset

Non-Sena

Headset

Example of a Three-Way Universal Intercom

Example of a Four-Way Universal Intercom

You

Non-Sena

Headset

Non-Sena

Headset

Sena

Headset

You

Sena

Headset

Non-Sena

Headset

7.7 advanced noise Control™

(Default: enable)

advanced noise Control

setting can be found

in the

Configuration menu

. Please refer to

Section

2.7: “Configuration menu”

for more details.

advanced noise Control

is enabled, background

noise is reduced during intercom conversations.
If

advanced noise Control

is disabled, the

background noise is mixed with your voice while

using the intercom

Summary of Contents for X1 PRO























































































Search results

Summary of Contents for X1 PRO

Reviews:

Related manuals for X1 PRO

Brands by name

Popular brands

Sena X1 PRO, Manual

Search results

Summary of Contents for X1 PRO

Reviews:

Related manuals for X1 PRO

Brands by name

Popular brands