Sena X1 PRO Manual Download

Page: 58 / 86

Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 58

7. INTERCOM SETUP

menU

4. To terminate

group intercom

, press the

Center

Button

for

1 second

during

group intercom

You will hear a voice prompt, “

group intercom

terminated

.”

TAP

Start Group Intercom

End Group Intercom

END GROUP

INTERCOM

START

GROUP

INTERCOM

BLUETOOTH

LED STATUS

“Group intercom”

“Group intercom connected”

“Group intercom terminated”

Green LED Flashing

HOLD

7.6 Universal intercom

Universal intercom

allows you to have intercom

conversations with users of non-Sena Bluetooth
headsets. You can pair the X1 Pro Smart Cycling

Helmet with only one non-Sena headset at a time.
The intercom distance depends on the performance

of the Bluetooth headset to which it’s connected.
When a non-Sena Bluetooth headset is paired with
the Bluetooth Helmet, if another Bluetooth device

is paired via

Second mobile Phone Pairing

, it will

be disconnected.

1. Execute

Universal intercom

in the

Configuration

menu

. Please refer to

Section 2.7:

“Configuration menu”

for more details.

Summary of Contents for X1 PRO























































































Search results

Summary of Contents for X1 PRO

Reviews:

Related manuals for X1 PRO

Brands by name

Popular brands

Sena X1 PRO, Manual

Search results

Summary of Contents for X1 PRO

Reviews:

Related manuals for X1 PRO

Brands by name

Popular brands