Sena X1 PRO Manual Download Page 24

Page: 24 / 86

Sena X1 Pro Smart Cycling Helmet Firmware v1.0 | 24

2. GettinG started

menU

2.6.3 Sena Camera app

The

Sena Camera app

allows you to see

a live preview from the camera, manage
recorded videos as well as configure the video
settings using the built-in WiFi feature on
your

X1 Pro Smart Cycling Helmet

. To do

so, connect your mobile phone with the

Pro Smart Cycling Helmet

by following the

instructions provided on the

Sena Camera

app

. You can download the

Sena Camera

app

for Android and Apple operating

systems.

2.7 Configuration menu

2.7.1 Headset Configuration Setting

The

Bluetooth Communication module

can

be configured by following a series of voice
prompts. Further details about each of these

settings will be explained on the following

pages.

To access the

Headset Configuration

menu

, press and hold the

Center Button

for

10 seconds

until you hear the voice

prompt, “

Configuration menu

.”

TAP

Accessing the Confi guration Menu

Navigating Forward through the Menu

Navigating Backward through the Menu

Enable/Disable or Execute a Feature

NAVIGATE

FORWARD

NAVIGATE

BACKWARD

ACCESS

CONFIG.

MENU

“[Menu prompt]”

ENABLE OR

DISABLE

EXECUTE

10s

HOLD

Summary of Contents for X1 PRO























































































Search results

Summary of Contents for X1 PRO

Reviews:

Related manuals for X1 PRO

Brands by name

Popular brands

Sena X1 PRO, Manual

Search results

Summary of Contents for X1 PRO

Reviews:

Related manuals for X1 PRO

Brands by name

Popular brands