6.1.17 UV Val: UV detection sensitivity value, ranging from 0 to 10 (
“
0
”
is off,
“
10
”
is the highest); the default is
“
4
”
.
6.1.18 MG INR val: MG detection sensitivity value for the INR, ranging from 0 to 30(
“
0
”
is off,
“
30
”
is the
highest); the default is
“
6
”
.
6.1.19 MG USD val: MG detection sensitivity value for the USD, ranging from 0 to 30(
“
0
”
is off,
“
30
”
is the
highest); the default is
“
6
”
.
6.1.20 Width Set: the note width sensitivity value, ranging from 30 to 90; the default is
“
63
”
.
6.1.21 Len500Max: the maximum of the Rs.500 length, ranging from 167 to 177; the default is
“
150
”
.
6.1.22 Len100Max: the maximum of the Rs.100 length, ranging from 157 to 167; the default is
“
162
”
.
6.1.23 Len50Max: the maximum of the Rs.50 length, ranging from 147 to 157; the default is
“
152
”
.
6.1.24 Len10Max: the maximum of the Rs.10 length, ranging from 137 to 147; the default is
“
142
”
.
6.1.25 Currency Sel: currency selection.
“
0
”
is for USD with UV/MG counting;
“
1
”
is for INR with mixed value
counting. The default is
“
1
”
.
7. Restore to the factory setting
Press
“
UV+MG+RESET
”
at the same time, meanwhile turning on the machine, after hearing
“
beep
”
sound, the
machine is restore to the factory setting.
8. Feeding clearance adjustment
8.1 The good feeding clearance condition: smooth feeding, accurate counting, good friction.
8.2 The bad feeding clearance condition: after a long time of usage, the roller and the rubber tape will be loose,
then it will result in inaccurate counting(generally the counting number will be less than the right notes number).
Adjustment operation: rotate the adjustment screw anticlockwise until the machine can count smoothly and
accurately. Do not rotate it too much, it will result in unsmooth counting or breaking the note.
6.1.18 MG INR val: MG detection sensitivity value for INR, ranging from 0 to 30(
“
0
”
is off,
“
30
”
is the
6.1.19 MG USD val: MG detection sensitivity value for USD, ranging from 0 to 30(
“
0
”
is off,
“
30
”
is the
length of Rs.500, ranging from 167 to 177; the default is
“
150
”
.
length of Rs.100, ranging from 157 to 167; the default is
“
162
”
.
length of Rs.50, ranging from 147 to 157; the default is
“
152
”
.
length of Rs.10, ranging from 137 to 147; the default is
“
142
”
.
