Press this key to switch the AUTO/MUL counting mode.
Press this key to turn on/off the UV detection.
Press this key to turn on/off the UV detection.
1.Press this key to turn on/off the accumulation function.
2.In the sensitivity level setting, press this key to turn to the previous page.
1.In the BATCH mode, short press this key can increase the batch number one by one.
2.Long press this key, the batch number can be increased continuously, batch rang is 1-100.
1.In the BATCH mode, short press this key can decrease the batch number one by one.
2.Long press this key, the batch number can be decreased continuously, batch rang is 100-1.
1.Press this key can turn on the BATCH function, if press it again, the user can select among
“
100, 50, 20,
10, off
”
.
2.In the sensitivity level setting, press this key to go to the next page.
1.Press this key can clear all the fault message, then keeping counting.
2.In the sensitivity level setting, press this key to save and exit.
3.Long press this key for 3 seconds, after hearing the
“
beep
”
sound, then the machine is restored to the
factory setting.
5.3 The introduction of the side display panel and the key function
Key
Function
Side display
1.Press this key can clear all the fault message, then keeping
counting.
2.In the sensitivity level setting, press this key to save and exit.
3.Long press this key for 3 seconds, after hearing the
“
beep
”
sound, then the machine is restored to the factory
setting.
Press this key to turn on/off the accumulation function.
Press this key to turn on/off the UV, MG detection.
1.Press this key can clear all the fault message, then keeping
counting.
2.In the sensitivity level setting, press this key to save and exit.
