17
16
Press button D
to display all the
menu icons.
Use button B and C to
move to the automatic
door lock icon.
The automatic door
lock icon blinks.
Select the icon
with button D.
The current setting,
OFF appears.
Press button B to set
the function to ON, or
button C to set it to
OFF.
After completing the
configuration, press
button D.
Finish the configuration.
4
4-
-8
8.. C
Co
on
nffiig
gu
urriin
ng
g c
cu
urrrre
en
ntt rre
em
mo
otte
e c
co
on
nttrro
oll ttiim
me
e
The alarm function of the remote control can be configured
The clock of the remote control can be configured if necessary
in the same manner as that of Configuring engine start time.
4
4-
-9
9.. C
Co
on
nffiig
gu
urriin
ng
g rre
em
mo
otte
e c
co
on
nttrro
oll a
alla
arrm
m ((D
De
effa
au
ulltt sse
ettttiin
ng
g iiss O
OFFFF))
The alarm function of the remote control can be configured
if necessary in the same manner as that of Configuring engine
start time.
4
4-
-1
10
0.. C
Co
on
nffiig
gu
urriin
ng
g a
au
utto
om
ma
attiic
c d
do
oo
orr llo
oc
ckk ((D
De
effa
au
ulltt sse
ettttiin
ng
g iiss O
OFFFF))
Automatic door lock feature provides the following functions:
① If door is not opened within 20 seconds after unlocking the
doors with the remote control, the doors are automatically locked.
② The door lock is automatically applied to secure safety during the driving.
* If the starter is connected to the generator, the door lock is applied when you step on
the brake twice, and if the starter is connected to TACH, it is applied when RPM goes over 1500.
③ When the ignition key is removed after driving, doors are unlocked
automatically.
※ If the communication with the vehicle is failed, the function will not’
be set.
※ Brain operates based on the time set of the terminal. That's why
accurately setting up the timing of the terminal is so important.
4
4-
-7
7.. C
Co
on
nffiig
gu
urriin
ng
g ttu
urrb
bo
o sstto
op
p ((D
De
effa
au
ulltt sse
ettttiin
ng
g iiss O
OFFFF))
Turbo Stop Mode allows you to leave your vehicle running when the
ignition key is removed to cool the engine especially after high-speed
or long-distance driving. To stop the engine by force, press and hold
button D for seconds, or press the brake pedal. Configurable
period range is 1 ~ 20 minutes.
Press button D
to display all the
menu icons.
Use button B and C to
move to the turbo stop
icon.
The turbo stop icon
would blink.
Select the icon
with button D.
The current setting,
OFF appears.
Press button B to set
the function to ON, or
button C to set it to
OFF.
The current configured
time period is
displayed.
Press button B to
increase the period by 1
minute, or button C to
decrease it by 1 minute.
After completing the
configuration, press
button D.
Finish the configuration.
※ If the communication with the vehicle
is failed, no icon will be displayed and
only an error tone will sound.
※ No icon appears during LPG gas
switch operation.
