SIS 25/0.65 SMI
21
Step 5
Use the UP or DOWN button and drive to the upper limit stop.
Depending on the installation side and depending on the
running direction, the lower end position must be
approached with UP or DOWN. The correct allocation of the
direction of rotation takes place with the last programming
step.
Step 6
press „E“ button for 3 seconds
LED glows GREEN (approx. 10 seconds).
The limits are set
Del et e t he programmed posi t i ons
8.
press „E“ button for 6 seconds
LED glows RED
Adj u st t he programmed l i mi t s
9.
End positions cannot be individually adjusted or modified.
Always delete the old positions first
Delete limits
