16
SIS 25/0.65 SMI
Charact eri st i cs
4.
The drive is suitable for installation in conventional 25x25 mm headboard made of steel sheet, and
headboards made of extruded aluminum, as long as the cross-section of the head strip corresponds to the
contours of the drive.
See also:
"Mounting / Dimensions"
"Intended use"
Funct i ons
Y
N
Obstacle detection in OPEN direction
X
Obstacle detection in Down direction
X
Automatic rotation direction assignment
X
Parallel connection of more than one motors
X
switch off at point: lower limit
X
Switch off automatically at point: lower limit
X
switch off at point: upper limit
X
Switch off automatically at point: upper limit
X
As sembl i ng
5.
Di mensi ons
Gehäuselänge
Gehäusequerschnitt
Ad apt ors f or the rods
size
Pay attention to the alignment of the actuator and the rod.
The drive must be secured against axial displacement after installation in the head rail
and insertion of the reversible rod into the adapter.
Assemebling
