GB
Transmitter programming procedure
78
Next, press the
STOP
button
and then the
DOWN
button as
well, and keep them both
depressed.
After 3 seconds, the roller shutter will begin to move downwards
as it is being programmed.
When the required intermediate position has been
reached, keep the
STOP
button depressed and, if
necessary, correct the position with the
UP
or
DOWN
button. Release the
STOP
button when the exact
position has been reached.
The intermediate position will now be saved in the receiver.
2.2) Setting the ventilation position from the lower end limit
To set the ventilation position, move the roller shutter to
the lower end limit.
Next, press the
STOP
button
and then the
UP
button as well,
and keep them both depressed.
After 3 seconds, the roller shutter will begin to move downwards
as it is being programmed.
When the required ventilation position has been
reached, keep the
STOP
button depressed and, if
necessary, correct the position with the
UP
or
DOWN
button. Release the
STOP
button when the exact
position has been reached.
The ventilation position will now be saved in the receiver.
Note:
When using a SELVE-radio-motor as a receiver only the
intermediate position can be programmed.
> 3 sec.
1.
2.
1.
1.
> 3 sec.
1.
2.
Summary of Contents for i-R Marki Send Plus
Page 42: ...Notizen D 42...
Page 84: ...GB Notes 84...
Page 128: ...F Notices 128...
Page 170: ...NL Notities 170...
