8
8.2. Main menu
Main menu includes a lot of settings which allow to configure the receiver. To enter main menu, press
MENU
button on the remote control. Menu lines may be marked (selected) by using
/
buttons. Selected line is
highlighted. To enter the window of the selected menu line, press
OK
button, and in order to return back to the
previous menu window, press
MENU
button. To exit from main menu, press
EXIT
button. To enter to submenu
SETTINGS
and
RECORDINGS
select corresponding line and press
OK
.
Fig. 8 Main menu
8.3. Settings
You can change receiver‘s parameters in the selection of this menu by adjusting it to the conditions of the user.
8.3.1.
Favorite editor
This option allows to edit the program list made by a user. The editor works only when the full list is loaded and
this function is supported by an operator. Section 8.5 Teleguide gives a detailed explanation on how to perform
this task.
8.3.2.
Channel search
Before starting the search of the channels, make sure that the LAN networks cable is connected or it was
connected to the wireless WLAN networks. Channel search in IPTV receiver
– is a playlist load or reference to
the playlist where IP addressed are indicated as well as other information of broadcaster transmitted TV
programs. Select
Menu->SETTINGS->Channel search
and press
OK
. Enter to the submenu of channel search
and press
button, pass to the right side of the window, and active colorful buttons will appear. Press the blue
Add new
button. The playlist loading window will open.
Fig. 9 Channel search
If you chose
Type->Upload play list file
, then put a USB storage with the recorded playlist file to the USB
socket, then choose the line
Name
and press
OK
. The virtual keyboard will open. By using it, enter the desired
broadcaster name. The selection of necessary symbols is being exercised by moving the cursor of the keyboard
and pressing
OK
. When the broadcaster
‘s title setting will be finished, move the cursor to
Enter
and press
OK
.