15
After configuration load in software update option it is possible to find updates suggested by IPTV broadcaster
and to update SW as it was described in paragraph Software update. IPTV broadcaster given playlist will be also
loaded, found and used as described in 8.3.2. Channel search.
If broadcaster changes configuration of receivers, he checks if there is a new configuration version each time
you turn receiver off and on, and download and load the configuration.
Fig. 23 Load configuration from network
If a new configuration has a reference to a new software version, it will be automatically loaded and installed,
see Fig. 21 Downloading software from network. Also, if there are any changes in playlist, it will be automatically
updated, and new versions will appear in program list or old and non-actual programs will be deleted.
Stand by mode
Select
Stand by mode
and press
OK
, and you can select the time after the receiver will go to standby if a user
is inactive (fell asleep, forgot to turn off IPTV receivers when switched off television or alike). Confirm the option
by pressing
Apply
.
System time
System time and its correction are made automatically. Receiver synchronize the time from the first selected
program and after that from the program selected from this menu. Selection local program is recommended.
Fig. 24 System time
In
System time
window must be selected
Time zone
and option
Daylight Saving Time
. When all options are
set, press
Apply
. System time will be synchronized and window will close. The time in receivers is always being
corrected and figured by the season. If you had already selected settings in original settings or do not wish to
make any changes, then press
Exit
button on remote control to go out from menu fully.
Location
There are two possible ways to set the place where to operate receivers: automatically, when the place is set by
IP address on the internet, at place of the window
internet according IP
and
manually
. When you select a
manual way to set the location, in the line
Current location:
you have to enter the name of the town or location
where the receiver is being operated in. Leaving default place choose
internet according IP
is being
recommended.