8
Accumulation
● The accumulation function is used to add multiple weights and total them together
● In weighing mode load the first weight, once stable press the ACCUM key to enter
the accumulation mode. The “total” light will display
● Remove weight and press ZERO key before adding the second weight to the scale
● Once stable press ACCUM key to add the weight to the accumulated total
● Press ZERO Key before adding the next weight to the scale
● Repeat previous step until all desired weights have been added to the total (max 999
times)
● When you are done and want to display the accumulated total, press the ACCUM
and PRINT key together. The accumulated number “
n
###” (the number of weights
you are adding together) will flash on the display followed by the total
● The total will display by flashing between 2 sets of numbers
● There are 8 digits in total, the display will flash 4 at a time, the first 4 on the left and
the last 4 on the right. For example if the first 4 digits are “0012” and the last 4 digits
are “3456” the actual weight is 001234.56 or 1234.56 lbs/kg
● If you want to print the accumulated total, hold the PRINT key for one second while
the last 4 digits of the total are shown
● To exit accumulation mode, wait for the last 4 digits to the right of the screen to
appear, and then press and hold the ACCUM key for one second
● “
CLr n
” will be displayed, asking you if you want to keep the data?
● If NO you do not want to clear the accumulated total, then keep “
CLr n
”.
● If YES you do want to clear the accumulated total, then use the Zero key to change
to “
CLr y
”.
● Finally, press the PRINT key to select exit accumulation mode
