77
III.
OTHERS
III-1. How to use Button Camera (SG-110, SG-210, SG-310 model only)
1. Press [ENT] for 2 seconds to turn on the power.
2. Connect Self-Guard with Button Camera through the port in the body “Connector
with Docking” .
3. Use [ ] and [ ]
◁
▷
to change
3.EXT CAM3: OFF to ON
. (“OPTION” -> 1.CAMERA
SET -> 3.EXT CAM3: OFF) (When not using internal camera(s), turn OFF 1.INT CAM1).
4. Use [ ] and [ ]
◁
▷
to change
3.EXT MIC: OFF to ON
. (“OPTION” -> 2.RECORD
SET -> 3. EXT MIC: OFF)
5. In the main menu, select “1.RECORD” and press [ENT] to record audio and video
of button camera.
6.
When removing button camera from Self-Guard,
turn ON “1.INT CAM1”
(“OPTION” -> 1.CAMERA SET -> 1.INT CAM1: OFF)
and “2.INT MIC”
(“OPTION” ->
B.RECORD SET -> 2.INT MIC: OFF) to reactivate internal camera and microphone.
78
TROUBLESHOOTING GUIDE
z
Self-Guard shuts down its power for no reason automatically
The Self-Guard automatically turns off the power or goes into the power-savings
mode if you don’t press any button for a certain amount of time (1-9 minutes). This
does not indicate malfunction of the system.
In “RECORD” and “TRANSMIT” modes, Self-Guard turns off only the LCD, battery
status LAMP, and recording status LAMP to save the battery. But, in the rest of
the modes except for “RECORD” or “TRANSMIT”, it turns off the power
completely. Set the time to 0 to deactivate “AUTO POWER OFF” function.
Caution: To maximize the life of the battery, do not turn off “AUTO POWER
OFF” function.
z
Battery power fades quickly.
1. When you are not using the Bluetooth, set “
POWER
” to off from the menu
“BLUETOOTH”. (SG-300, SG-310 only)
2. In the menu “OPTION”, select “SAVE BAT” from the menu “POWER SET” of the
menu “OTHERS”, and set on “SAVE BAT”.
z
If I connect the Self-Guard with the adaptor, then the Self-Guard turns on its
power automatically.
Self-Guard has a function named, “automatic recovery function”, and it
automatically turns on its power when it is provided with external power sources.
If there is an electricity (a power) failure, Self-Guard automatically starts to use the
power from its battery. But the Self-Guard turns off its power, when it is not
provided with the power from the adaptor for a long time, and uses up the whole
battery. And as soon as the electricity is available to the Self-Guard, it
automatically starts to charge the battery with electricity, and returns back to the
modes just before it turned off its power (“RECORD”, “TRANSMIT”, or to the initial
mode). This function is very useful when you have installed the Self-Guard in the
remote places far away from you. In the case that you have installed the Self-
Guard in remote places, and there happens an electricity failure for some time and
the electricity gets available to the Self-Guard again, then you have to go to where
the Self-Guard is placed to turn it on, and to set it to the “RECORD” or
