Selesta Ingegneria S.p.A.
RFIDat
is equipped with a long life and rechargeable Metalhydrated Nickel
batteries, an LCD display and a key with LED indicator.
RFIDock/x: docking station units
RFIDock/M/S and RFIDock/L are the docking station units used to transfer data
recorded in the
RFIDat
memory to a PC equipped with a specific software product.
Instruction Manual – Ver. 1.4
‐
16/10/2009 – pag. 4 of 12
Selesta Ingegneria S.p.A.
The indicator placed on the
RFIDat
display shows with good approximation
the battery level.
Attention
: the
RFIDat
’s are shipped with the internal battery partially
charged (about 30%) to preserve its conditions.
Attention
: it is
MANDATORY
to charge the
RFIDat
batteries for at least
30 hours before its first use or its storage
Attention
: every 5 months it is necessary to completely recharge (at least
30 hours) the
RFIDat
battery also in case it has been stored. This operation
allows to maintain the battery in good state of efficiency. This time can be
reduced in case of storage at high temperature.
Attention
: in case of non complete recharging cycle (for instance if only
1 hour), a NOT reliable value for the battery level could be visualized on
the
RFIDat
display.
Maintenance and Safety
The
RFIDat
, under correct conditions of use, doesn't require any maintenance
operation. Nevertheless, periodic cleaning operations are recommended.
These must be done using a soft and not abrasive cloth, slightly dampened
with water.
Attention
: the improper use of the system components or not
respecting the instructions reported in this manual, can involve
damages to people, animals and/or goods. The producer declines any
responsibility.
Attention
: the use of the products could have restrictions imposed by
the norms of the Country where they are used. The user is therefore
bound to verify the possible restrictions and to respect the current
national norms.
Instruction Manual – Ver. 1.4
‐
16/10/2009 – pag. 9 of 12
RFIDock/M
RFIDock/S
Modular docking station unit with:
‐
temporary memory with 8.000 readings capacity
and function for:
‐
communication management between
RFIDat
and
PC
‐
RFIDat
batteries recharging
Types of connection to PC
‐
Serial (EIA RS232C)
‐
USB
‐
Ethernet
LED indicators
‐
Power on
‐
Data transmission in progress
‐
RFIDat
reader inside docking unit
RFIDat
readers battery
charging and recharging
With induction technology
Power source
12VDC, 700mA from RFIDock/AL
Available configurations
1, 2, 4, 8 docking units (up to 7
RFIDock/s
)
Installation
On desk or wall
Dimensions and weight
Single module: 55 x 48 x 83 mm, 74 g
PC connections
‐
USB/AL
‐
USB adapter, powered from USB
‐
Ethernet/232
‐
RS232C / Ethernet converter
‐
USB/232
‐
RS232/USB cable converter
Assigned name
Time and Date
Master Mode indicator and reading
counter from RFID transponder
Battery level indicator
Key and LED indicator
Reading counter from other
RFIDat when in Master Mode
