IN0020
Revision 05
004799
– 6 of 8
POWER PERFORMANCE PASSION
Installation Notes
SP
PRO
C
ONFIGURATION
–
A
UTOMATIC
G
ENERATOR
C
ONTROL
The generator will run upon loss of grid supply on the default settings based on low battery
voltage or SoC if enabled. If you wish to enhance this operation, consult SP PRO User manual
– Generator Automatic Start for full details.
Reference Information
RL1
-
V
OLTAGE
M
ONITOR
The internal voltage monitor (RL1) is factory set and should not be adjusted. The factory
setting is detailed below:
: + 15 %
: - 8 %
: 3 s
: DIP-switches – under cover –
1 – ON (DEL-REC)
2 – OFF (N.E.)
3 – ON (6 s)
4 – OFF (INHIBIT)
5 – ON (230 VAC)
6 – OFF (230 VAC)
WARNING: Do not open the DIP-switches cover if the Power Supply is ON.
