6
M965652 Rev. 1.5 (1/16)
Fig. 2
Fig. 2a
10a
11
7
2
2
7
Fig. 2b
2
3
1
6
6
9
9
FROM ELECTRICAL BOX
WITH POWER SUPPLY
Fig. 2c
BLACK & WHITE
POWER
CONNECTIONS
15
13
CONNECTOR NOT
USED IN THIS
INSTALLATION
10b
14
4" ELECTRICAL BOX
OR EQUIVALENT BY
OTHERS
12
8
2
PLUG INTO
WALL OUTLET
B
AC VERSION; Fig. 2
•
PLUG-IN
•
HARDWARE
Note: For AC installation, make power supply connection
before mounting CONTROL BOX (3) to wall.
1.RemoveCONTROLBOXCOVER(1). Feed the
EXTENSIONCABLES
(2) from the Faucet through
thetopofCONTROLBOX
(3). Fig. 2.
FOR AC PLUG-IN ONLY
2a.InsertPOWERCORD (8) throughPOWERSUPPLY
GROMMET
(9) Fig. 2a.
3a.InsertPOWERCORD(8)throughsideGROMMET (6)
as shown.
Fig. 2a.
4a. Connect27
"
EXTENSIONCABLES
(2)toSOLENOID
CABLE
(7) andPOWERCORD(8). Fig. 2a.
5a. Mount CONTROLBOX to wall. Reinstall CONTROLBOX
COVER
(1). Tighten cover screws firmly.
6a.PlugACPOWERSUPPLYintowalloutlet.
FOR AC HARDWIRE ONLY
2b. Insert one end of the 10
'
EXTENSION
(10a) through
POWERSUPPLYGROMMET
(9). Fig. 2b.
3b. Insert 10
'
EXTENSION
(10a) through side
GROMMET
(6) as shown. Fig. 2b.
4b.Connect10’EXTENSION(10a) to single terminal of
Y-ADAPTER
(11). Fig. 2b.
5b.Connect27"EXTENSIONCABLES(2) toSOLENOID
CABLE
(7) and to either of the two available terminals of
theY-ADAPTER
(11).
6b. Mount CONTROLBOX (3) to wall. Reinstall CONTROL
BOXCOVER
(1). Tighten cover screws firmly.
Contractor to supply ELECTRICAL BOX (12) and power
to POWER SUPPLY (13).
7b.MountPOWERSUPPLY (13) intoELECTRICAL
BOX
(12). Connect White and Black connections to
POWERSUPPLYCONNECTIONS
(14). Fig. 2c.
8b. Connect the10
'
EXTENSION
(10b)tothePOWER
SUPPLYCABLE
(15). Fig. 2c.
CAUTION
Disconnect AC power supply
before opening CONTOL BOX.
CAUTION: Use only American Standard supplied cable sets.
Using non-AS supplied cables, or cutting, splicing or modifying
any components will void the warranty.
