SE10 Manual
3
Selectronic Australia
Portable Use
By using optional battery clips, the SE10 can be connected directly to a
vehicle battery. When using Alligator clips ensure they have a tight grip
around the battery post. Wherever possible battery connections should be
bolted. If connecting the SE10 through a cigarette lighter socket the
maximum power output of the SE10 will be severely restricted, this
practice should be avoided. Check with your supplier or installer if you are
unsure.
Do not use alligator clips in a moving vehicle
Auxiliary Battery
Earth (to chassis)
SE10 Inverter
Start Battery
Earth (to chassis)
Isolator
Vehicle
Alternator
By incorporating an auxiliary battery in the manner above, the starting
battery should remain charged for vehicle starting (see your auto electrician).
The SE10 has sufficient battery cable length to allow it to sit underneath the
vehicle whilst in use. If the ground is wet, place the SE10 on a waterproof
liner.
