Step 5: Hold Down Installation (optional)
The Shade fabric is easy to care for. Regular dusting with a feather duster or
vacuum cleaner brush is recommended. Most stains can be blotted with a
damp sponge and mild detergent. Before using anything stronger than mild
detergent and lukewarm water, test an unobtrusive corner of the shade. If
you have any questions, call your dealer for advice.
Cleaning and Care
Cellular
Push Button Cordless
Installation Instructions
Our window fashions represent a design breakthrough in
style, efficiency and function. Our Cellular shades feature
100% non-woven polyester fabric providing a soft diffused
light and high level of privacy. The unique hardware system
is designed to provide years of reliable service when properly
installed.
Please take a few minutes to read through
these instructions before beginning.
152126
Rev C.
5/4/2015
If the bottom rail or the middle moving rail of a top down/bottom up
shade is not level, it can be adjusted by following the procedure below.
Remove the right endcap from the rail that is not level.
Pull out the section labeled TOOL.
Push in on the adjustment screw with the
tool and turn to adjust the rail.
When the rail is level, replace the tool and
the endcap.
Optional Hold Down Brackets are mounted with the supplied
screws. With the shade at its proper drop, place the pin of each
Hold Down into the hole in each End Cap and mark the screw holes.
Make sure the pins are level and aligned. Remove the pins from the
endcaps. Raise the shade, then screw the Hold Down Brackets into
the mounting surface. Lower the shade. Slightly flex the holddown
brackets to insert the pins into the endcaps.
Standard
Top Down/
Bottom Up
ऐऋऋई
Step 4: Level the Moving Rail (If Necessary)
