15
3.3 Fitting eye terminal to swaged stud (Stud/Eye)
Fig. 3.3.a
Fig. 3.3.b
Fig. 3.3.c
1.
Remove the toggle from the eye fitting.
2. Screw the eye terminal part onto the stud terminal until the holes in stud and eye align.
3. Fit the spirol spring pin using a hammer to permanently lock the terminal.
3.4 Drum unit assembly
1. Unscrew the two screws holding the adaptor halves together. Take care not to loose the the screws.
2. Remove the clevis pin that goes through the tube shaft in the drum unit.
Fig. 3.5.a
Fig. 3.5.b
