Selbach OTHG 105, Manual

Page: 7 / 19

7
60-0426-0000
11/12
6.0 Installation
Installing the machine
To ensure trouble-free operation, the mulled wine heater must be positioned on a level surface.
Make sure that there is sufficient space available to connect the beverage lines.
Select an installation site where the equipment is protected against wet conditions.
Also make sure that the connection cable is not kinked or pinched and goes straight to the
socket. The mains plug must be easily accessible at all times.
Preparing for installation
Route the mulled wine supply line (G 5/8”) and the power connection directly to the machine.
This preliminary work is to be arranged by the customer: the owner of the machine shall
commission a state-licenced dispensing equipment technician to perform the work, taking into
consideration general provisions and local requirements. Feedthroughs and drilled holes in
counters or worktops for the machines must be positioned so that live parts cannot be touched.
Caution! Do not alter the hose materials and hose lengths in the device.
7.0 Electrical connection
All machines are electrically heated. The 8.4kW machine is connected to 400 V three-phase
alternating current with a neutral line (N). The socket or three-phase outlet with easily accessibly
master switch is included in the scope to be provided by the customer and must be executed in
accordance with DIN VDE 100. To improve safety, the device should be protected by an
upstream ground fault circuit interrupter with 30 mA rated fault current (DIN VDE 0664).
No additional appliances may be connected to the supply lines.