SEL-2600 RTD Module
Date Code 20000525
SCHWEITZER ENGINEERING LABORATORIES
2350 NE Hopkins Court • Pullman, WA 99163-5603 USA
Phone: (509) 332-1890 • Fax: (509) 332-7990
Internet: www.selinc.com • E-mail: [email protected]
!
CAUTION:
Do not connect ac or dc voltage to
the contact input.
!
DANGER:
Disconnect power before removing
top cover.
Schweitzer Engineering Laboratories, SEL
OGIC
, and
are regis-
tered trademarks of Schweitzer Engineering Laboratories. All brand
or product names appearing in this document are the trademark or
registered trademark of their respective holders. U.S. and Foreign
Patents Pending.
The software (firmware), schematic drawings, module commands,
and module messages are copyright protected by the United States
Copyright Law and International Treaty provisions. All rights are
reserved. You may not copy, alter, disassemble, or reverse-engineer
the software. You may not provide the software to any third party.
È
2000 Schweitzer Engineering Laboratories. All rights reserved.
!
ATTENTION:
Ne pas raccorder de source de
tension CA ou CC sur le contact d'entrée.
!
DANGER:
Débrancher l’alimentation avant de
retirer le couvercle du dessus.
R
Notes