Sel 3355-2 Manual Download Page 5

Schweitzer Engineering Laboratories, Inc.

SEL-3355-2 Data Sheet

5

Front- and Rear-Panel Diagrams

Figure 7

SEL-3355-2 Front Panel

Figure 8

SEL-3355-2 Rear Panel

q

 

LAMP TEST

 Button. Press and hold to test front-panel LEDs. Can be programmed to be an on/off or reset button.

w

 

ENABLED 

and 

ALARM 

LEDs provide operational status. A green ENABLED LED indicates normal operation. The ALARM LED 

illuminates red when a nonoptimal system condition exists.

e

 

ETHERNET 

Status Indicators. Link (LNK) indicates that the port is connected, and activity (ACT) indicates when data are 

being transmitted and received.

r

 

SERIAL 

Status indicators. Transmit (TX) and receive (RX) LEDs indicate activity on serial ports.

t

 

PINHOLE

 Button.  Provides reset and power functions; requires a pushpin to prevent accidental use. 

y

 

HDD

 Activity Indicator. Illuminates when SATAv drives are accessed.

u

 

AUXILIARY

 Status Indicators. Three programmable, bicolor LEDs for your custom application.

i

 

USB

 Ports. Two easily accessible ports to connect USB 3.1 peripherals.

o

 

SATA

 Drive Bay. Removable cover plate enables easy access to SATA drives from the front panel.

i

y

o

q w

e

r

u

t

q

 

DVI-D

. Connect digital monitors by using native DVI or an HDMI adapter.

w

 

ETH1

 and 

ETH2

. Onboard independent Gigabit Ethernet interfaces.

e

 

USB 

Ports. Connect as many as four USB 3.1 peripherals at the rear panel.

r

 

AUDIO 

Ports. Line Input (blue), Line Output (green), and Microphone Input (pink).

t

 

COM1 

and 

COM2

. Standard EIA-232 serial ports with config5 Vdc power on Pin 1.

y

 

DISPLAYPORT

. Connect new digital monitors supporting the DisplayPort interface. 

u

 

ALARM

. The Form C alarm contact output can be wired either normally closed or normally open.

i

 

PCI 

Expansion Slots. Install SEL or third-party PCI or PCI Express expansion cards for additional network, serial, or other 

application-specific I/O.

o

 

Earth Ground

 Terminal Screw. The earth ground connection for the SEL-3355-2.

a

 

POWER

 Supply Modules.  The rated input voltage is clearly marked on the chassis near the terminals.

i

r

w e

t

y

u

o

a

q

Summary of Contents for 3355-2













Reviews: