Seko RINSTRUM K356, Technical Specifications

Page: 12 / 24

1 2
SetUp
Set Display Decimal Point:
the display will show "
dp
" Press "
T
" (
Tare
)
(Decimal Point)
Press SELEC T
and the display will show
"
000000
" (No decimals) If necessary, press
Print
to remove the Decimal Point. Decimal point setting
for vehicle scales should be
no decimal .
Press
"
f
/OK " to store Decimal Point Setting . The
display will show "
dp
" .
Set Scale Calibration Weighing Capacity:
Press " T " ( Tare )
The display will show "
CAP
"
(Weighing Capacity) of the Scale
The display may
show 00 5 000 or
Press
SELEC T
another weight.
Set the Maximum Scale Weighing Capacity
The
Capacity
should be set to one of the following amounts:
The label/safe/rated lift capacity of the machine
Slightly above the maximum weight to be lifted in your application.
Press
SELECT
to select digit and
PRINT
to change the value of
the selected digit. The selected digit will flash.
SEKO
Forklift Scale may pre-set
005000
for most small forklift
application
s.
Set Scale Display Resolution: ( 1, 2, 5, 10, 20, 50, 100 )
Press "
T
" (
Tare
) the display will show
"
rES
"
Press
" f
/OK
"
to store Scale Weighing Capacity . The
display will show " CAP ".