2.1.2
User ID setting incase no EEPROM equipped on the receiver
1. If the receiver has no the optional serial EEPROM or if the stored data and the CRC value in
the EEPROM is not valid, the receiver blinks the DATA indication LED in every a second when
Power up time. Operate any input device, keyboard, mouse or remote control, the receiver no
longer blinking the DATA indication LED except a valid IR data indication blinking. When an IR
data received except the data for Left-Control, Left-Shift, Right-Shift and Esc key, the receiver
set the user ID with the user ID number in the first received IR data packet as a default user ID.
Once the user ID has been set, the receiver receives only the data that has as same user ID
number as its internal user ID number. The four-key combination, Left-Control, Left-Shift, Right-
Shift and Esc key is used to enter Matrix ID setting and Country code setting mode. When a
user use both the keyboard and the remote control with a receiver, the user must set the same
user ID number on the keyboard and on the remote. The stored user ID number will be lost
when system power down. Every power on time it