Tokyo Branch
Never touch LED light sources and their surroundings.
The light sources and their surroundings are very hot, so an accidental touch might cause a burn.
Fax
SEIWA ELECTRIC MFG.CO., LTD.
Phone
For further information on the product, contact any of our offices listed below (if you like to make an inquiry, let us know the model name
indicated on the product nameplate).
CONTACT DETAILS
Fax
2-19-6 Yanagibashi, Taito-ku, Tokyo 111-0052 Japan
+81 3 5833 8971
+81 774 58 2034
+81 3 5833 8946
Please note that the above addresses and phone numbers may be changed.
Phone
36 Shinike, Terada, Joyo, Kyoto Pref. 610-0192 Japan
Head Office
+81 774 55 8181
To ensure brightness and safety, carry out periodical cleaning and inspection.
If used in an extended period without maintenance or inspection, a smoke, fire or electric shock might result.
A lighting fitting has a service life. A product which has been used for eight to ten years may have degraded internal parts
even if it looks normal. For safety and energy saving, we recommend you check and replace it.
*Operating conditions: ambient temperature of 30 ° C, 10 hours per day, 3,000 hours per year. If used at a higher
temperature or more hours per year, the life would be shortened. Have a specialist inspect the product every three years.If
used for an extended period without inspection, a smoke, fire or electric shock might result.
CAUTION
For a product marked with a frequency, don
’
t use the product at a frequency other than 50 or 60 Hz (local power supply
frequency). Use at a wrong frequency might cause a fire.
Do ’t use the produ t at a oltage other tha the rated oltage i di ated o the a eplate.
Otherwise, breakage, fire or electric shock might result.
Any product not marked as a product for outdoor use should not be used outdoors or in a humid place or near a water
source. Its use in such a place might cause a fire or electric shock.
The product should be mounted on a surface robust enough to support its weight, properly according to the instruction
manual. Improper installation might cause the product to fall or result in an electric shock or injury.
If you continue to use the product in an abnormal condition (smoke, odor, etc.), a fire or electric shock might result. If you
detect an abnormality, immediately turn off the power switch. Confirm that the abnormal condition has been eliminated
and make a repair call.
WARNING
L照般4
Installation of the product should be carried out by a qualified person.
Installation by an unqualified person is legally prohibited.
Don
’
t use the product in a strong corrosive gas atmosphere which contains hydrochloric acid or chlorine gases or the like.
Use in a corrosive gas atmosphere might cause the product to corrode and fall, resulting in an injury.
- 2/2 -
