Seiwa BB 200 User Manual Download Page 2

Page: 2 / 40

User Manual

Important Information

CAUTION

♦

Please read through this manual before the first operation. If you have any

questions, please contact the Company's customer service or your local

dealer.

♦

The BB 50/200 is not built water proof. Please make sure to avoid water

intrusion into the unit. Water damage is not covered by the warranty.

♦

Extensive exposure to heat may result in damage to the BB 50/200.

♦

Connection to the power source with reversed polarity will damage the BB

50/200 severely. This damage is not covered by the warranty.

♦

The BB 50/200 contains dangerous high voltage circuits which only experi-

enced technicians MUST handle.

WARNING

♦

When plugging in or unplugging a transducer to the BB 50/200 make sure

power is turned off.

NOTE

We will not be liable for errors contained herein, or for incidental or

consequential damages in connection with the performance or use of this

material.

Summary of Contents for BB 200









































Search results

Summary of Contents for BB 200

Reviews:

Related manuals for BB 200

Brands by name

Popular brands

Seiwa BB 200, User Manual

Search results

Summary of Contents for BB 200

Reviews:

Related manuals for BB 200

Brands by name

Popular brands