Secure the toggle bolts into the seat connection holes, ensuring that the stainless steel pins line up with the receptor holes in the seat.
Once correctly placed, ensure that the bolts are properly tightened.
Slide the stainless steel caps onto the plates with pins.
To fit the seat, slide it onto the stainless steel pins. You may need to make adjustments to position the seat correctly.
To release the seat, put the seat in an upright position, press the buttons on the seat and lift upwards.
To fit seat, slide seat down
onto stainless steel pins.
To remove seat, put seat in
upright position, press the
buttons on the seat and lift
upwards.
10 SEAT PACKAGE CONTENTS AND INSTALLATION
1 x seat and lid
Has receptor holes that slide
onto stainless steel pins.
2 x stainless steel caps
(used to cover stainless steel plate w pin)
2 x stainless steel plates with pin
(seat locates onto stainless steel pins)
2 x toggle bolts
(used for securing stainless steel plate and pin to pan)
Page 4 of 4 | seima.com.au
