4. Operation
4.1 Operation process instructions
1) Turn power switch, adjust light
2) Place the sample
3) Put 10X objective into light
path and focus the sample
4) Adjust interpupillary distance
and diopter
5) Adjust condenser aperture
diaphragm
6) Adjust and center field diaphragm
Put the objective into light path
and focus
Observe
Turn on B11 power switch and turn B9 pentiometer
Put the sample on A6 stage (open the clamp, and
put the sample on it), turn B7, B8 stage knobs to
put the sample into light path
Turn A4 nosepiece, put 10x objective into light path,
turn B13, B14 coarse and fine focus knobs.
Adjust A2 head to make two fields into one;
adjust B2 diopter adjuster to make diopter
for both eyes the same.
Adjust A8 condenser (B10 condenser focusing screw)
and aperture (B3 Aperture diaphragm lever).
Adjust field diaphragm (B5 field diaphragm
revolver), adjust center screw B4 to center
field diaphragm.
4.2 Operation
1) Illumination
1. Confirm the voltage is available
2. Turn on power switch B11
3. Turn B9 potentiometer to adjust light
6
Summary of Contents for Microlux IV
Page 1: ...Microlux IV LED Operations Manual...
Page 16: ......