background image

English

English

This  watch  requires  no  periodic  battery  replacement  as  it  is  powered  by  the 

exclusive rechargeable battery, which is completely different from conventional 

batteries for watches.
This exclusive rechargeable battery is an environmentally friendly, clean energy 

storage device.

 CAUTION

  Never install a silver oxide battery for conventional watches in place of the 

rechargeable battery, which can generate heat that can cause bursting or 

ignition.

POWER SOURCE (RECHARGEABLE BATTERY)

NOTES ON OVERHAUL

The watch is a precision device. If the parts run short of oil or get worn out, the 

watch may stop its operation or lose time. We recommend you have the watch 

overhauled periodically to keep it running accurately.

SPECIFICATIONS

1. Frequency.of.crystal.oscillator.............................. 32,768.Hz.(Hz.=.Hertz.….Cycles.per.second)
2. Loss/gain.(monthly.rate)....................................... Less.than.15.seconds.(worn.on.the.wrist.at.normal.

temperature.range.between.5°.C.and.35°.C)

3. Operational.temperature.range............................. –10°.C.~.+60°.C.
4. Driving.system...................................................... Step.motor:.2.pieces
5. Display.system..................................................... 24-hour,.hour,.minute,.second,.date,.day.of.the.

week,.and.moon.phase.

Power.reserve.display,.power.generation.status.

display,.and.generated.power.amount.display.

6. Rechargeable.battery............................................ Button.type,.1.piece
7. Duration.of.charge................................................ Approximately.1.month.(if.the.watch.is.fully.

charged)

8. Additional.functions.............................................. Overcharge.prevention.function
9. IC.(Integrated.Circuit)............................................ C-MOS-IC,.1.piece.
10. Generating.system............................................... Miniature.AC.generator

*  The specifications are subject to change without prior notice for product improvements.

Summary of Contents for SRX011P1













Reviews: