Seiko LTPH245, Technical Reference

Page: 65 / 67

8-2

Insert the paper vertically into the printer. (See Figure 8-2 ).
Pull the paper through the paper outlet and replace the platen block into the printer mechanism.
Make sure that the platen block locks with a click.

Opening the platen block exposes the reduction gear which can be damaged if touched.
Therefore, take care not to damage the gear when inserting the paper. Moreover, make sure
there is no foreign matter on the gear.
Figure 8-2 Loading Paper (2)

The out-of-paper sensor may not operate properly if covered with foreign matter. Therefore, if
you find foreign matter on the sensor, remove it and clean the sensor.

If the paper skews, feed the paper so that it returns to normal, first, then take it out and set it
again.
2) Unloading paper

Open the platen block and remove the paper.
3) Removing jammed paper

Open the platen block and remove any jammed paper.

Do not pull the paper by force.