![Seiko GPS SOLAR ASTRON 5X53 Complete User Manual Download Page 53](http://html1.mh-extra.com/html/seiko/gps-solar-astron-5x53/gps-solar-astron-5x53_complete-user-manual_1235507053.webp)
Troubleshooting
Possible causes
Solutions
Reference pages
Misalignment of
date
After the reception is successful, the
time is correct but the date is incorrect.
The preliminary position of the date is out of alignment.
This problem occurs when the preliminary position of the date is out of
alignment due to external influence etc.
Adjust the preliminary position of the day hand (a day of week) to the correct position
“SUN (Sunday).”
The sub-dial
cannot be
adjusted.
After the reception is successful, the
basic time is correct but the time zone
selected on the sub-dial is not
displayed.
The preliminary position of the sub-dial is out of alignment.
This problem occurs when the preliminary position of the sub-dial is out of
alignment due to external influence etc.
Correctly adjust the sub-dial and the AM/PM hand to the preliminary position of
“12:00 AM”.
Indicator hand
misalignment
The position of the hand showing the
reception way, charging status, in-
flight mode (
), and DST is
misaligned
The automatic leap second reception function has been
activated, and the indicator hand indicates the “LEAP
SEC.”
It takes up to 18 minutes to complete the leap second reception.
Use the watch with reference to the
The preliminary position of the indicator hand is misaligned.
This occurs when the preliminary position of the indicator hand is misaligned
due to external factors.
Adjust the preliminary position of the indicator hand to the correct position “full.”
Operation
The crown or buttons cannot be
operated.
The stored electric power is running short.
Sufficiently charge the watch until it starts moving at 1-small second intervals.
Date is moving right after a setting is carried out by the crown or button
operation.
Wait without doing anything. After the date stops, the crown and buttons can be operated.
-
You get lost in the middle of the
operation.
-
When the crown is pulled out
①
Push the crown back in.
②
The seconds hand will start to move within 6 minutes.
③
After that, restart operation.
-
When the crown is not pulled out
①
Press Button B.
②
The seconds hand will start to move within 2 minutes.
③
After that, restart operation.
-
Other trouble
Blur in the display persists.
A small amount of water has got inside the watch due to deterioration of the
gasket, etc.
Consult the retailer from whom the watch was purchased.
-
52
7
TROUBLESHOOTING
ASTRON 5X53 GPS SOLAR