manualshive.com logo in svg

Seiko GPS SOLAR ASTRON 5X53, Complete User Manual

Share
Download
Seiko GPS SOLAR ASTRON 5X53 Complete User Manual Download Page 40

The rubber bands and some leather bands are provided

with an adjustable three-fold clasp (Pointed tip diving

type) of the type where the pointed tip of the band dives

downward as shown in the figure.
If the clasp of the watch you purchased is as follows,

please refer to the following instructions.

1

Open the clasp and pull upward by

pressing the push buttons on both sides of

the buckle.

Buckle

Push button

Band

2

Fasten the clasp by pressing the frame of

the buckle.

1

Open the band clasp by pushing the

buttons on both sides of the clasp.

Buckle

Push button

Band

2

Pull the pins out of the adjustment holes at

both locations.

Pin

Pin

Adjustment hole

3

Slide the band to the right and left and at

an appropriate length, push the pins firmly

into the adjustment holes again at those 2

locations.

●

How to wear or take off the watch

●

How to adjust the length of the band

 * The above illustrations are provided as examples. Some details may differ depending on the model.

How to use an adjustable three-fold clasp (Pointed tip diving type)

39

6

TO PRESERVE THE QUALITY OF YOUR WATCH

ASTRON 5X53 GPS SOLAR

Summary of Contents for GPS SOLAR ASTRON 5X53
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands