background image

The indicator hand position shows whether this watch is able or unable to receive GPS signals.
In addition, for the low charging state, the movement of the seconds hand shows the energy depletion state in further detail.

 * GPS signal reception requires a lot of energy. Keep in mind to regularly charge the watch by expose to light.→ About charging

 

P. 14

Check the charging status

 

Reception is allowed

Indicator display

Charging status

Solution

full

Reception is allowed.

Use the watch as it is.

→ 

P. 15

middle

Reception is allowed, but keep in mind to charge

the watch.

→ 

P. 15

 

Reception is not allowed

Indicator display

Movement of

seconds hand

Charging status

Solution

1-second

interval

movement

low

The watch is unable

to receive GPS

signals, but has

energy to operate.

Charge the watch at least until the

indicator hand points to the level

position so that the watch is able to

receive GPS signals.
→  About charging 

P. 14 

2-second

interval

movement

-

The watch is unable

to receive GPS

signals, and does not

have energy to

operate. (The energy

depletion

forewarning function

is activated. → 

P. 33

)

Continue to charge the watch at least

until the indicator hand points to the

level position so that the watch is able

to continuously operate and receive

GPS signals.
→  About charging 

P. 14 

5-second

interval

movement

-

The charging status is not

displayed for the in-flight mode

(

).

Reset the in-flight mode (

) as long

as possible.
→  Reset the in-flight mode

(

). 

P. 30 

When the indicator hand points to

“low,” charge the watch following the

above.
→  About charging 

P. 14 

13

3

BEFORE USE

ASTRON 5X53 GPS SOLAR

Summary of Contents for GPS SOLAR ASTRON 5X53
























































Reviews: