Seiko Cal. V198 Instructions Manual Download Page 6

Page: 6 / 25

ish

gli

◆

This watch is designed so that the following adjustments are made with the
crown at the second click position.

1) Time settings for main dial and alarm sub dial.
2) Calendar setting
3) Hand position adjustment for alarm hour and minute hands, day hand and

calendar hand.

Second click

▲

◆

With each press of but ton B, the display mode changes between the

CALENDAR/ALARM mode and the STOPWATCH mode alternately.

HOW TO CHANGE THE DISPLAY MODE

Calendar hand

Day hand

CALENDAR/ALARM

MODE

STOPWATCH MODE

• When the display mode is switched, the function of the hands will change accordingly.
• Before switching the display mode from the STOPWATCH mode to the CALENDAR/ALARM

mode, make sure that the stopwatch has been reset.

• While the stopwatch is counting, button B is used for ”SPLIT,” “SPLIT RELEASE,” or ”RESET”

functions.

Alarm sub dial

Power reserve indicator

Stopwatch hour and
minute hands

Small
second
hand

Stopwatch
second hand

Minute hand

Alarm sub dial

(Alarm hour and mminute

hands)

Main dial

Day hand

Calendar hand

TIME SETTING AND HAND POSITION

ADJUSTMENT

When any hand requires a

position adjustment, complete

the hand position adjustment

procedure first, and then move

on to the time setting procedure.

Summary of Contents for Cal. V198


























Search results

Summary of Contents for Cal. V198

Reviews:

Related manuals for Cal. V198

Brands by name

Popular brands

Seiko Cal. V198, Instructions Manual

Search results

Summary of Contents for Cal. V198

Reviews:

Related manuals for Cal. V198

Brands by name

Popular brands