En
gl
ish
En
gli
sh
38
39
IMPROPER FUNCTION
When an abnormal display appears, follow the procedures below to reset the
built-in IC. The watch will resume its normal operation.
<HOW TO RESET THE IC>
1. Pull out the crown to the second
click.
2. Keep pressing down Button A and
B for 3 seconds or longer.
3. P u s h t h e c r o w n b a c k i n t o t h e
normal position and check if the
s m a l l s e c o n d h a n d m o v e s a s
normal.
B
A
CROWN
Resetting the IC will initialize the watch. Before starting to use the watch, it
will be necessary to set the time and adjust the STOPWATCH hands to the “0”
position. Refer to “TIME SETTING AND HAND POSITION ADJUSTMENT” section
of this manual.
ROTATING BEZEL (for models with rotating bezel)
●
The rotating bezel can show up to 60 minutes of elapsed time.
1 Turn the rotating bezel to align its "
"
mark with the minute hand.
Note
: For some models, the rotating bezel rotates only counterclockwise.
Start
Elapsed time
2 Read the number on the rotating bezel
that the minute hand points to.
30 minutes have
elapsed.
