How to set the time, date, and day of the week
The watch is provided with a date and day of the week function and is so designed that the date
and day of the week change once every 24 hours.
The date changes around midnight, and the day of the week changes at around 2:00 a.m. If
AM/PM is not properly set, the date will change at 12 o’clock noon, and the day of the week will
change at around 2:00 p.m.
b
CAUTION
The day and date cannot be adjusted during the “No setting period,” from 9:30 p.m. to
2:00 a.m, even if turning the crown. Turning the crown during this period will not cause
a malfunction.
EN
16
1
HOW TO USE
■ How to set the time
1
Make sure that the watch is working.
* To carry out the procedure, please make sure that the watch is in working state. Please wind the mainspring
when the watch is not working.
Pull out the crown
to the second click
when the seconds
hand is pointing at
the 0 second
position.
2
Pull out the crown to the second click
when the seconds hand is pointing at
the 0 second position. The seconds
hand stops moving.
* For models with screw down crown, please unlock the
crown before operating it.
3
Turn the crown to advance the hour and
minute hands until they indicate the
current time. Make sure that AM/PM is
correctly set.
EN
17
1
HOW TO USE
4
Push the crown back in to the normal position in accordance with a time signal.
The seconds hand immediately starts moving.
* The telephone time signal service is helpful for setting the seconds hand exactly.
* For models with screw down crown, please be sure to lock the crown after operating it.
b
CAUTION
The mechanism of mechanical watches is different from that of quartz watches.
When setting the time, be sure to turn back the minute hand a little behind the desired
time and then advance it to the exact time.
EN
18
1
HOW TO USE
■ How to set the date and day of the week
* For 6R27, procedure 2 (setting the day of the week) is not necessary.
Pull out the crown to the first
click
1
Pull out the crown to the first click.
The seconds hand continues moving.
2
Turn the crown clockwise to set the day
hand.
For every two clicks, the day hand moves by one
day.
<For Cal. 6R24>
* Do not set the day hand to point to an intermediate
position between two day indicators.
* If you turn the crown after the day hand points to
Saturday, the day hand jumps back and stops
pointing to Sunday.
* If you fast forward the day hand after it points to
Saturday, the day hand may jump back and forward
to point to Monday, skipping Sunday. If this happens,
turn the crown slowly to reset the day hand again.
EN
19
1
HOW TO USE
