background image

3

Pull the pin out of an adjustment hole of the

band. Slide the band to adjust its length and

find an appropriate hole. Place the pin into the

hole.

Pin

Adjustment hole

Pin

Adjustment hole

4

Fasten the flap.

EN

36

2

TO PRESERVE THE QUALITY OF YOUR WATCH

How to use an easy adjust type clasp

Some bands are provided with an easy adjust type clasp for fine adjustment of the band’s length.

If the clasp of the watch you purchased is as follows, please refer to the following instructions.

 * The band can be lengthened by up to about 5 mm.

This is useful if the band feels too tight or is uncomfortable for some reason.

EN

37

2

TO PRESERVE THE QUALITY OF YOUR WATCH

How to wear the band (Opening and closing the clasp)

Push button

Buckle

1. Lightly press the push buttons to open the

clasp.

 * Note that pressing the push buttons too

firmly (deeply) actuates the adjuster, which

lengthens the band.

2. Fasten the clasp by pressing the frame of

the buckle.

EN

38

2

TO PRESERVE THE QUALITY OF YOUR WATCH

How to adjust the length of the band

1. You can lengthen the band by up to about 5 mm

(2 stages) by firmly pressing the push buttons

from both sides to actuate the adjuster.

2. Fasten the clasp by pressing the frame of the

buckle.

 * Even while the clasp is closed, you can still retract

the length of band extended by the adjuster.

 * The above illustrations are provided as examples. Some details may differ depending on the model.

EN

39

2

TO PRESERVE THE QUALITY OF YOUR WATCH

Summary of Contents for 6R20














Reviews: