background image

Version: 02/02/05                                                                                                   Page 21 of 22 

package. Do not include any manuals or accessories in the shipping package. SEI will 
only replace the defective portion of the Product and will not ship back any accessories. 

 

The customer is responsible for all in-bound shipping charges to SEI. No Cash on 
Delivery (“COD”) is allowed. Products sent COD will either be rejected by SEI or 
become the property of SEI. Products shall be fully insured by the customer and 
shipped to 

System Engineering International, 5115 Pegasus Court, Suite Q, 

Frederick, MD 21704

. SEI will not be held responsible for any packages that are lost 

in transit to SEI. The repaired or replaced packages will be shipped to the customer via 
UPS Ground or any common carrier selected by SEI, with shipping charges prepaid. 
Expedited shipping is available if shipping charges are prepaid by the customer and 
upon request.  

 
SEI may reject or return any product that is not packaged and shipped in strict compliance with 
the foregoing requirements, or for which an RMA number is not visible from the outside of the 
package. The product owner agrees to pay SEI’s reasonable handling and return shipping 
charges for any product that is not packaged and shipped in accordance with the foregoing 
requirements, or that is determined by SEI not to be defective or non-conforming. 

 
What Is Not Covered: 

This limited warranty provided by SEI does not cover: Products, if in 

SEI’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, 
negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that 
is not contemplated in the documentation for the product, or if the model or serial number has 
been altered, tampered with, defaced or removed; Initial installation, installation and removal 
of the product for repair, and shipping costs; Operational adjustments covered in the operating 
manual for the product, and normal maintenance; Damage that occurs in shipment, due to act 
of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware 
or other products or services provided by anyone other than SEI; Products that have been 
purchased from inventory clearance or liquidation sales or other sales in which SEI, the sellers, 
or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair 
by anyone other than SEI or an Authorized SEI Service Office will void this Warranty. 
 

Disclaimer of Other Warranties: 

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED 

HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF 
ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY 
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-
INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY 
TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED 
WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY 
COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE 
RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS 
WITH THE PURCHASER OF THE PRODUCT. 
 

Limitation of Liability: 

TO THE MAXIMUM EXTENT PERMITTED BY LAW, SEI IS 

NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR 
OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE 
PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER 

Summary of Contents for juice box























Reviews: