Page | 7
Figure 5
Insert Cam Locks (B) into
corresponding holes on Back Rails
(5/6).
Screw Cam Bolts (A) into threaded
holes on pre-assembled unit from
Figure 4.
Attach Back Rails (5/6) to
pre-assembled unit from Figure 4
by inserting Cam Bolts (A) and
Wood Dowels (C) into
corresponding holes until all panels
meet.
Tighten Cam Bolts (A) by rotating
Cam Locks (B) clockwise using
Phillips screwdriver (not included).
Figure 6
Attach Knob (F) to pre-assembled
unit from Figure 5 with Bolt (G).
Tighten Bolt (G) with Phillips
screwdriver (not included).
Attach pre-assembled unit from
Figure 5 to Bottom Panel (8).
5
6
A
A
A
A
8
F
