Page | 6
Figure 3
Insert Cam Locks (B) into
corresponding holes on Back Rails
(5/6).
Screw Cam Bolts (A) into threaded
holes on pre-assembled unit from
Figure 2.
Attach Back Rails (5/6) to
pre-assembled unit from Figure 2
by inserting Cam Bolts (A) and
Wood Dowels (C) into
corresponding holes until all panels
meet.
Tighten Cam Bolts (A) by rotating
Cam Locks (B) clockwise using
Phillips screwdriver (not included).
Figure 4
Insert Cam Locks (B) into
corresponding holes on
pre-assembled unit from Figure 3.
Screw Cam Bolts (A) into threaded
holes on Back Post (7).
Attach Back Post (7) to
pre-assembled unit from figure 3
by inserting Cam Bolts (A) and
Wood Dowels (C) into
corresponding holes until all panels
meet.
Tighten Cam Bolts (A) by rotating
Cam Locks (B) clockwise using
Phillips screwdriver (not included).
5
6
A
A
C
A
7
A
